Peugeot Forums - Peugeot Fan Club

206 1.6 cc rev / speed

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 20:20 # 1
meteora
Hello friends. I have been using the vehicle for 2 years. I had a question on my mind. I searched a lot on the internet but I couldn't find the results I wanted. Is this speed / rev range normal values 1.6 cc gasoline 2001 [IMG] http: // [/ IMG]
08.05.2020 20:20 # 2
sonerkyl
Why is my normal teacher engine fault light on?
08.05.2020 20:20 # 3
meteora
The catalyst was full. They emptied her. So they burned out a couple of times, but on the long way it is still burning
08.05.2020 20:20 # 4
sonerkyl
I shouldn't have burned the floor like it is related to the oxygen sensor.
08.05.2020 20:20 # 5
meteora
When we connect it to the computer it does not show any error but still it can be oxygen sensor
08.05.2020 20:20 # 6
sonerkyl
If it is faulty, it should come out error code strange engine fault light flashing not seeing error code.
08.05.2020 20:20 # 7
meteora
When I spoke like this, I scratched how nice I was now Best of all, let me go tomorrow. But at least the normal period of the transfer made me comfortable. It always feels like a lot to me, from 110 to over 3,000 cycles. Of course, it affects the fuel as well. Thank you for your interest and answers.
08.05.2020 20:20 # 8
boruc
I think the car has the same engine 1.6 110hp roland garros

I reach a speed of 110 km at 3000 rpm.
Your age seemed to me too much.

Also, the temperature is over 90's, is it continuous?

08.05.2020 20:20 # 9
meteora
There is no oil temperature on the right. On the left, the temperature indicator is small. Yes, with the same engine speed, there is no such thing but I think. I also bought an obd eml device today. I erased and see when it will burn again
08.05.2020 20:20 # 10
boruc
[QUOTE = meteora] No, it's the oil temperature on the right. On the left, the temperature indicator is small. Yes, with the same engine speed, there is no such thing but I think. I also bought an obd eml device today. I erased and see when it will burn again [/ QUOTE]

I have mixed it because there is no oil temperature indicator, sorry.

I think the speed / speed ratio may change when the pressure starts running out of the pad.

With the odb device, you can control the cycle, the dashboard may show faulty. Because it is very problematic, it can show more or less in 206 hours.
08.05.2020 20:20 # 11
meteora
I just checked it and it came out with the same result indicator. In addition, the obd apparatus seems to show only revolutions and malfunctions since the model of the vehicle is 2001. For some reason the fuel does not see air-like sensors. instant consumption etc. Let me also leave a fixed picture at 3000 cycles, maybe others need to be solidified. [IMG] http: // [/ IMG] meteor 2017-05-07 15:59:16
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”