|
|
|
|
206 1.4 XT Signal Problem. |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 18:07 | # 1 |
 rifatseker |
|
|
I have an interesting situation on my 2004 1.4 XT 206. The vehicle has a headlight sensor. The interesting part is that when I signal to the right side, dipped beams turn on after the 3rd signal, and the signal stops. There is no problem when the headlights are on or the parks are on signal and everything is working normally. I would be glad if there is this kind of incident happening to him and if he can solve it, he can share it with me. Meanwhile, I am open to any suggestions.
|
|
| 08.05.2020 18:07 | # 2 |
 sulocan_5 |
|
|
I have a 2004 model 206 XT vehicle. I had a problem like this. When the headlights turned on, the signals were not working. When the lights were turned off, I was afraid. No problem. Construction does not make you live again. My advice to you is if you have an auto electrician you trust. Take a look at it. Because those who do not want to deal with it may say `` need to change the arm. ''
|
|
| 08.05.2020 18:07 | # 3 |
| rifatseker |
|
|
Thank you for the information, this was also on my mind, but my fear is not a problem on the BSI side. :) It seems like I will do if this arm does not work.
|
|
| 08.05.2020 18:07 | # 4 |
| sulocan_5 |
|
|
You're welcome. I hope it will be fixed as soon as possible .. :)
|
|
| 08.05.2020 18:07 | # 5 |
| Mesut48 |
|
|
Go to the damaged master's repair path or replace it. The same problem exists in my vehicle I use it like this
 |
|
| 08.05.2020 18:07 | # 6 |
| rifatseker |
|
|
Thank you. Finally, I brought him the opinion. Let me see for now.
|
|