206 1.4 HDi TRACTION / ACCELERATION PROBLEM

Hello friends,

My car was throwing some black smoke in the bottom gas after 2500 cycles, for a long time I wanted to do manifold cleaning, but I could not find a tour.

Today I found free time and put in to clean the car's intake manifold and removed the air filter boiler, turbo connection pipes.

Then I unscrewed the plastic manifold (oil inlet part) screws etc. and then I removed the connections from the diesel filter to remove it in the diesel filter, then I started to collect the back of the maf sensor with the cloth, I wiped the back of the maf sensor with the cloth and wiped the back to clean the vehicle. did not work, aired

Anyway I tried to get the air, I had the name, I started off, before the engine malfunction lamp came on, but everything is normal in the vehicle.
Because the contact was turned off and my act got better, but it didn't. I opened the hood, checked all the connections, all in place.

Anyway, I started off, I listened to the vehicle, everything was normal, the road was smooth, then I said to get on the gas at the slope.

I checked all the turbo inlet / outlet and pipes, the problem is not seen, when the pressure is on the gas, the turbo pipe gets fogged, there is pressure. When he got on the gas, his black smoke disappeared.

What do you think could be the problem with the malfunction lamp and the vehicle?

Thanks in advance for your answers rufuk 2016-01-09 20:54:31

No one to help?

Sir, you probably left individuals loose while wearing it back. The situations you mentioned seem to be related to turbo. Especially check turbo hoses or something cracked

I checked all the connections 3 times, no problem, there is pressure in the turbo, no sound from the flap.

Sir, get well soon. It's hard to guess here. The best thing you need to connect to the PC and have a look at it may be corrected when the error is deleted.

Today it is connected to the pc, air flowmeter malfunction detected, as soon as I cleared the error again gave the same fault. How do we solve it, does it have to be changed, is there any other way, is it repaired etc.? rufuk 2016-01-18 20:10:30

Something about 120 pounds is not repairing that part as far as I know because it is a very sensitive part

[QUOTE = KIZILASLAN] Something about 120 lira doesn't repair that part as much as I know because it's a very sensitive piece [/ QUOTE]

It is true that the original is around 200 lira. I have two, I changed one, the owner changed the previous owner, and I changed the problem. Let me give you what I removed from the vehicle, if the exact flowmeter is your problem. I need an air inlet hose.

[QUOTE = madblueblacksea] True, the original is around 200 lira. I have two, I changed one, the owner changed the previous owner, and I changed the problem. Let me give you what I removed from the vehicle, if the exact flowmeter is your problem. I need an air inlet hose to me:) [/ QUOTE]

If you are in Istanbul, let's meet and try.

I wrote privately

Check if you unplugged the fuel filter. it may not be fully seated.

[QUOTE = madblueblacksea] I wrote privately [/ QUOTE]

Did you meet in 3 months