Peugeot Forums - Peugeot Fan Club

2018 dating tepee humming in 4 gear

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » Partner tepee
10.10.2020 20:22 # 1
ulas55
Hello friends, I just joined you, 2017 model 2018 March I bought a partner hill vehicle for traffic 115 hp allure package 1 month ago the vehicle is still chronic at 25 thousand km, or in general, the gearbox of the vehicle is very hard and makes such strange sounds when it works in the relay clutch. I wonder if it moves from the flywheel, there is no problem in its departure, and when the steering wheel turns left and right, I get a slight noise, but there is an obvious hum in the 4 gears of my vehicle, so when I pull the car from 5 to 4 and release the engine brake, the hum starts when it accelerates, the gear cuts I have to do it all the time, if it is in gear, there is no problem in the passages, it is annoying that this vehicle is 25 thousand yet it is 2 years old My previous vehicle fiorinoy du gearbox did not have a click sound I did 150 thousand km, except for the lining, I think this vehicle will have a headache. frankly i am cooled from the car i bought with love and admiration ..
12.10.2020 14:21 # 2
sonerkyl
Teacher, the problem may be in the flywheel or the pressure ball.
12.10.2020 15:21 # 3
ulas55
Thank you bro for your answer, but I don't understand if it is from the flywheel, it should be in all gears.
13.10.2020 11:34 # 4
sonerkyl
Yes, maybe. but it is strange that it only does it when you get compression in 4 gears, now obviously it is caused by the flywheel, which is usually the result of your caring. But if there is a problem with the transmission, he should always do that problem. I guess it looks like the problem cannot be found without removing it. wedges and axles have never been checked.
13.10.2020 13:18 # 5
ulas55
[QUOTE = sonerkyl] can be yes. but it is strange that it only does it when you get compression in 4 gears, now obviously it is caused by the flywheel, which is usually the result of your caring. But if there is a problem with the transmission, he should always do that problem. I guess it looks like the problem cannot be found without removing it. I have never checked the wedges and axles. I do not use it for purpose, if the noise increases, I will either go to the service or look at a master I know very well when I go to my country.
13.10.2020 16:45 # 6
sonerkyl
In fact, when the authorized service has seen the last maintenance, if the vehicle has seen the last maintenance in the service, you may have the chance to have it done under the guarantee of goodwill.
13.10.2020 17:08 # 7
ulas55
The 15000 maintenance of the vehicle has been done in Baydar, Bursa, but the warranty of the vehicle was completed in March 2020. I live in Çorlu. 🤔 The vehicle is currently at 26700 km ulas552020-10-13 17:10:09
14.10.2020 13:49 # 8
sonerkyl
valle teacher got to meet the official Peugeot service in ücretisiz turkey if you can get a discount of 40-50%.
16.11.2020 23:14 # 9
ulas55
My brother will have a question for you.
17.11.2020 09:47 # 10
MustafaU
Could there be a problem in the mirror or the mahrut? I know the vehicles are different, but my vectra b was a chronic problem in my vehicle, there was a weird buzz when moving, my foot was cut when I threw the clutch, I had it solved for a price of 600 lira with lathe and disassembly labor.
17.11.2020 10:15 # 11
ulas55
[QUOTE = MustafaU] I wonder if there is a problem in mirror or mahruti? I know the vehicles are different, but my vectra b was a chronic problem in my vehicle, there was a weird buzz in motion, my feet were cut off when I threw the clutch, I had it solved for a price of 600 lira with lathe and disassembly labor. My distress is different, so the trouble is like 2 separate places, the first trouble is when the vehicle is idling, so I started the gearbox for the first time, there is no movement in the gearbox.There is a clinking sound, then it does not make a sound or something on the road until you press the clutch and move the vehicle, the other problem is only when driving in 4 gear Room is not loaded, that is, when I take my foot out of the gas and leave the vehicle to compression, but when I leave the vehicle to compression, there is an obvious humming, only 4 gears, no problem in the other gears, no problem, take-off, shaking, no such things clutch I forced it for several times to try the slightest No miss, but these two different sounds it bothers me ende The previous owner probably used it unconsciously, the other one seems to be knocked from going without cycle in 4 gears.The fact is that I have had 2.3 different brand vehicles until this time, like all user error, I have used long distance in the city, I have never had a transmission problem, except for printing change, the room was always at periodic km. .
17.11.2020 10:18 # 12
MustafaU
I understand frankly it is not an event that happened to me or I heard, but I hope you find a solution in a short time, you may have done it, but I think if you do some research in foreign sources, you may find a solution suggestion.When you enter the industry, our masters are trying to solve the problem by trial and error, but I hope volant or It is not caused by the transmission and it does not cost that much. Get well soon.
17.11.2020 10:19 # 13
ulas55
By the way, the vehicle is only 2 years old and at 27000 km is an amazing situation. 😌 😌
17.11.2020 10:26 # 14
MustafaU
Unfortunately, this is a bit of luck, I am a IT support specialist in a group of companies and there are 4 automobile plazas within our company, including 5 different brands, and even those who eat motor at 5 thousand kilometers are a bit of a luck use, but I hope you will find a solution in a short time and you will ride your car with pleasure. .
17.11.2020 10:28 # 15
sonerkyl
[QUOTE = ulas55] My brother, I will have a question for you. I wonder if there is a volatile constant in my vehicle. [/ QUOTE] There is a moving flywheel in your vehicle.
20.01.2021 16:44 # 16
ulas55
Yes friends, we finished that famous breakdown as of today, I decided to dismantle the vehicle even though I resisted so much, the sound started to increase. Whatever the gearbox master is, let's come to the subject when the first jebriyaja pressure is released, the clutch ball is disintegrated and the printing umbrellas are finished, there was already a tremor, the socket pole bearing did not come out at all. Let's come to the problem 2, that is, the transmission of the vehicle in 4 gears is unfortunately out of the gear and differential gear. Both gears made a slight mark. Anyway, both of them have changed, we have bought a very clean part, there are prices like 3-4 thousand new ones ( better if you buy a gearbox ) There is no stain on the parts we have installed, we have removed the gearbox from the vehicle. It is possible to cut the sound completely. il said I did not want to believe me, but anyway, the gearbox was assembled, we came to the car and mounted it on the car, the sound continues, but it is very very low, it is not even heard if it does not rest very carefully.Another comment of the master is that the gears pressing each other too much pevgeot opel ford fiat models, and even mahrutiyi He mentioned that there were breakers and even showed the parts, he said that the situation was fabricated. "font-size: 11pt;"> I do not know what to say, I drove so much that this was the first time I had this thing. Briefly 1300 TL gearbox revision 850 TL printing set 800 TL labor we irrigated 2950 TL in total, our pevgeot vehicle at 27000 km is a disappointment for me. Anyway, I will drive for a while and take the vehicle out of my hands. um or I am unlucky in one of the fixed flywheels in the vehicle, the output plays well volat is both very expensive and almost every clutch set has to be changed at change is very costly. https://i.postimg.cc/zf601d8L/IMG-20210119-143115.jpg http: // https: //i.postimg.cc/hPBZj3xT/IMG-20210119 -135021.jpg https: // i. postimg.cc/MpZs0M9G/IMG-20210119-135028.jpg
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”