|
|
|
|
2006. 307sw 1.6 gasoline. where is the margin engine |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » All Questions About Your Vehicle | |
| 08.05.2020 20:21 | # 1 |
 aliagam |
|
|
You can help me, I would be very glad. I would like to change the margin engine .. Where is the place? I could not see  |
|
| 08.05.2020 20:21 | # 2 |
 sonerkyl |
|
|
Aleykümselam welcome to us. I couldn't find it very detailed, but I think it will work.  |
|
| 08.05.2020 20:21 | # 3 |
 sdttn |
|
|
When you look at the engine from the front, it is on the right in the back. You can see some of it when you remove the air filter box and the air hose. Edit: For 1.6 Gasoline engine. |
|
| 08.05.2020 20:21 | # 4 |
| aliagam |
|
|
Thanks .. Is it removed or underneath the engine? Is there any important point to pay attention to? I'll be back for the first time. |
|
| 08.05.2020 20:21 | # 5 |
| aliagam |
|
|
I'll take it out for the first time |
|
| 08.05.2020 20:21 | # 6 |
| sdttn |
|
|
I took it from the top. Put your hands on the right and left hands where the starter motor is located behind the engine, as if you hugged the engine. You have to manually locate and remove the bolts by hand. Air filter box, air hoses need to be removed. I don't remember if it was necessary to disassemble the battery completely (I think I removed it). Edit: I also took a picture. By the passenger.  |
|
| 08.05.2020 20:21 | # 7 |
| aliagam |
|
|
Thank you so much In the purchase of the key .. Which tour key would be best to buy? Best regards |
|
| 08.05.2020 20:21 | # 8 |
| sdttn |
|
|
Not without a socket set. You need an extension arm.
|
|
| 08.05.2020 20:21 | # 9 |
| aliagam |
|
|
I also got the bite set .. And I was able to insert myself and install a new one Thank you so much my friend. I will be entering a visa next month. There is a problem Water jars of eraser galba hole .. I put 4 liters of water in 20 minutes. It flows from the bottom. How is it removed? Can you help me Thanks in advance |
|
| 08.05.2020 20:21 | # 10 |
 uzunca961 |
|
|
[QUOTE = aliagam] I also got the bite set .. And I was able to insert myself and install a new one Thank you so much my friend. I will be entering a visa next month. There is a problem Water jars of eraser galba hole .. I put 4 liters of water in 20 minutes. It flows from the bottom. How is it removed? Can you help me Thanks in advance [/ QUOTE] If you could find the hole, I wouldn't be able to remove it and make plastic welding. If the replacement is a little bit a pity |
|
| 08.05.2020 20:21 | # 11 |
| sonerkyl |
|
|
[QUOTE = aliagam] I also bought the donut set .. And I was able to insert myself and install a new one Thank you so much my friend. I will be entering a visa next month. There is a problem Water jars of eraser galba hole .. I put 4 liters of water in 20 minutes. It flows from the bottom. How is it removed? Can you help me Thanks in advance [/ QUOTE] it is usually under the mudguard in the front right. will come across when removing the right front wheel and hood
|
|
| 08.05.2020 20:21 | # 12 |
 Popomundo |
|
|
You can remove it from the top, but you have to remove the battery, the air filter bowl or something.
|
|