![]() ![]() |
|
![]() |
2006 307 1.4 16v injector failure |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 |
08.05.2020 21:21 | # 1 |
![]() |
|
|
08.05.2020 21:21 | # 2 |
![]() |
|
Hello, I do not quite understand what the injector is intermittent. Did you mean open circuit or short circuit? Let me explain the working system as far as I know, if I am wrong, experienced friends will fix it. Fuel is pumped into the injectors, meanwhile, its temperature is measured, etc. is reported to the ECU. According to the software in the ECU, as you press the gas, the injector is commanded according to its ratio and fuel injection is provided. These signals are square waves. It happens in milliseconds timing. I know it is impossible to measure this with standard measuring instruments. The ECU detects injector error in two ways. Open circuit, short circuit. Although the vehicle fails after warming up and the injector you think is faulty, the reason for the failure may not be due to cable failure, pole polarity or loss of the cable assembly. Has the cable changed with the injector?
|
08.05.2020 21:21 | # 3 |
![]() |
|
thank you for your problem solved for you, 4 injectors instead of 1 injector changed 307 firing started right from the right throttle on the right side. but nobody said I would change the fourth injector instead of the first injector ![]() |
08.05.2020 21:21 | # 4 |
![]() |
|
I'm glad your problem is solved. Actually, you found the fault, but you did not know the injector sequence. :) Get well with this. Enjoyable to a thousand vehicles :)
|
08.05.2020 21:21 | # 5 |
![]() |
|
get well soon with that, hodja. thank you for the information.
|