2005 Model 206 HDI Accelerator Pedal Shake Problem

Hello friends,

I have a problem with my car lately. it jolts when I press the gas and take my foot out of the gas. this problem was occasionally occurring. started to increase. What could be the problem?

Thanks for your help in advance.

You must introduce yourself by opening the topic in accordance with the forum rules.

I opened and wrote these on the date I registered. Are the topics deleted after a certain period of time?

Normally they are not erased, but an intermediate forum experienced loss of information, perhaps you may have come across that date. Looks like you haven't entered since thenzz :))

:) No, I logged in later. However, due to my work, the input intervals are quite long.

I think the gas pedal is the virtual throttle.

I would be very glad if you could help with this. It bothers me a lot.

By saying virtual gas wire, you mean the electric side :))

for example,

I leave the accelerator pedal in the 1st - 2nd - 3rd gears at 2000 rpm. shaking after quitting.

[QUOTE = zephon] as an example,

I leave the accelerator pedal in the 1st - 2nd - 3rd gears at 2000 rpm. shaking after quitting.
[/ QUOTE]

I do not know that much detail. I was told that only somewhere was electric in these models. however, there are 206 HDI gas wires on spare parts sites. It can also be stranded.

The vehicle I am using now has the same engine. Such a problem sometimes happens when I pull my foot out of the gas, it does a little bit of rudimentary. I don't know if you mean it, but all the diesel Peutos I use do it.

Yeah. I'm talking about it. while hanging on the gas, it perceives with a slight shock. Of course, when we pull from the gas, the vibration I get is more severe than the vibration.

Exactly. I think it's normal, I remember it wasn't there when the car was zero, but I'm not sure. I used 4-5 1,4 206 diesels, they all have. Some are very, some are less.

yes it is.

Then it is time to press the pad. Cindy 2011-06-13 19:57:54

Thank you for the information you provided. Can I ask one more thing? I think we're talking about clutch pressure pads. What would this change cost me?

Clutch set (pressure-pad) Around 300TL parts price. There is also workmanship on it.

Thank you Beryay for the information you have provided. & Nbsp;

You're welcome.

Is there a brand you can recommend for the set?