|
|
|
|
2005 307 not pulling radio problem |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 16:08 | # 1 |
 Guests |
|
|
> friends my car 2005 model 307 look 1.4 gasoline in my radio does not shoot properly, I wonder if I change my original tape, I have problems with my road computer. .
|
|
| 08.05.2020 16:08 | # 2 |
 34sea45 |
|
|
if the radio does not pull out, the antenna socket may be out of the tape. As far as I know, the trip computer cannot be used. alternatively, you can install it from external electrical antennas. It has a price of 30 35 TL. |
|
| 08.05.2020 16:08 | # 3 |
 metin |
|
|
Was the radio used to shoot? Have you dismantled the test before, or did you do anything about the cables there? Have you disassembled the antenna on the back?
|
|
| 08.05.2020 16:08 | # 4 |
| Guests |
|
|
Ever since I bought it.
|
|
| 08.05.2020 16:08 | # 5 |
| metin |
|
|
When you bought it, you may be living in a region that does not attract. & nbsp; If you are somewhat inclined, I think of two possible reasons for this problem. & nbsp; 1- As 34sea45 says tape socket 2- is the possibility that the antenna on the ceiling oxidizes. & nbsp; < / DIV> To check the socket of the tape, insert the material such as thin skewers, crochet into the hole of 4 and remove the tape. then check the antenna input. & nbsp; To check the antenna on the ceiling, you can remove the antenna by turning it like a bolt and check the bottom. & nbsp; no problem anyway there may be a break in the antenna cable.
|
|
| 08.05.2020 16:08 | # 6 |
| Guests |
|
|
Thanks for the information you provided, I will try a friend. |
|
| 08.05.2020 16:08 | # 7 |
| metin |
|
|
you are welcome. |
|
| 08.05.2020 16:08 | # 8 |
| Guests |
|
|
friends, I took care of the problem right now there is no problem on my radio, it attracts channels well, thank you all for your information and help.
|
|
| 08.05.2020 16:08 | # 9 |
| metin |
|
|
[QUOTE = lazeros] friends have done the problem right now my radio has no problem, it attracts the channels well, thank you all for your information and help. & nbsp; so how did you handle what was the problem?
|
|
| 08.05.2020 16:08 | # 10 |
| Guests |
|
|
As you said, I removed the antenna, oxidation did not appear in its place, I put it back in place, I removed the radio and removed the antenna input and put it on. Thank you very much for all your help and attention.
|
|