|
|
|
|
2004 About 206 LPG Conversion. |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 06.06.2022 15:47 | # 1 |
 ByYlmzZz |
|
|
my car is gasoline at 280,000 km. I want to have an LPG conversion since I can no longer keep up with gasoline. (After making the engine healthy). Which brand and model kit should I install for 1--206? Can the bagel tube be attached to 206's now? 3-I got a price of 5 thousand liras for the kit from an Atiker brand, including mounting, how do you think?
|
|
| 07.06.2022 09:23 | # 2 |
 sonerkyl |
|
|
Hello, there is engineering in Istanbul, they seem to be good at their job, and I recommend you to talk to them. Atiker will be more than enough, but of course, the priority is good workmanship.
|
|
| 07.06.2022 19:35 | # 3 |
| ByYlmzZz |
|
|
I can't reach brother candaş neither via whatsapp nor by contact numbers. Can simit tube be made, first of all my question will be this?
|
|
| 08.06.2022 08:56 | # 4 |
| sonerkyl |
|
|
No bro, unfortunately, bagel tube 206 cannot be applied to vehicles. I used to drive a lot at the time. Since the stepper is exposed, it has to be attached to the bottom, but it cannot be given because its distance from the ground is not suitable.
|
|
| 08.06.2022 08:57 | # 5 |
| sonerkyl |
|
|
https://candanmuhendislik.com.tr/ you searched here, right?
|
|
| 08.06.2022 09:12 | # 6 |
| ByYlmzZz |
|
|
yes, I called there. I also wrote on the whatsapp line, but I can't get a response. Atiker produced a thin bagel tank for these 206's. some of them have worn and passed the inspection without any problems. If there is a possibility, it will be very useful for me.
|
|
| 08.06.2022 13:40 | # 7 |
| sonerkyl |
|
|
I understand bro it still has to be. I think you want this type of skin. |
|
| 08.06.2022 19:13 | # 8 |
| ByYlmzZz |
|
|
no bro, they were wearing thin bagel tanks instead of spare wheels.
|
|
| 10.06.2022 11:58 | # 9 |
 tsufrankwoli |
|
|
It is mounted on the spare wheel with protection under it, but the cost is high, You can have any kit with 2 ohm injectors installed Make sure to adjust the afr If you are lucky, you can also use LPG, if not, the vehicle will experience a misfire, idle idle imbalance. You spend a ton of money and continue to ride on gas.
|
|
| 10.06.2022 13:20 | # 10 |
| ByYlmzZz |
|
|
If I get Candaş done by my teacher, I will get Candaş engineering done. They are making a long road afr adjustment. Most customers who have it installed are quite satisfied.
|
|
| 14.06.2022 23:16 | # 11 |
 talip206 |
|
|
I had a lovato sequential system installed on my Peugeot 206 1.4 automatic vehicle 8 years ago I had no problems with LPG. Installation is more important than brand. They mounted the injectors so close to the manifold that it was not visible from the outside and the performance difference was very small. I see some of them pulled a 30 cm hose.
|
|
| 15.06.2022 22:13 | # 12 |
| ByYlmzZz |
|
|
Sir, did you use a group injector or was it placed one by one, do you remember?
|
|
| 20.06.2022 20:19 | # 13 |
| talip206 |
|
|
There are 4 injectors, their sockets were separate, but the injectors were stuck or attached to each other, I think it is called a separate model.
|
|
| 20.06.2022 21:50 | # 14 |
| ByYlmzZz |
|
|
I understand it's like atiker grand. It is a good system in terms of performance. However, the group recommends injectors to our vehicles. Engineering cordially. I made an appointment, but they are available as mid-July. need to go there for the right afr setting
|
|
| 21.06.2022 14:54 | # 15 |
| sonerkyl |
|
|
before starting the assembly, they examine the condition of the vehicle in gasoline, if they do not see it appropriate, they do not install anyway, they fix the problem and then start the assembly, my advice is to change the spark plugs and go.
|
|
| 21.06.2022 18:35 | # 16 |
| ByYlmzZz |
|
|
Brother, I will do the oil and filter maintenance soon. I did the valve adjustment yesterday. The map sensor and spark plugs remained next.
|
|