2004 206 door lock help |
|
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 |
08.05.2020 18:18 | # 1 |
gurkan21 | |
|
08.05.2020 18:18 | # 2 |
gurkan21 | |
no will he help |
08.05.2020 18:18 | # 3 |
oguzhan29 | |
keep the subject up to date, knowledgeable friends help |
08.05.2020 18:18 | # 4 |
kursat3006 | |
I have a similar problem for a long time. As far as I understand, the door is open, but the door is open. It's about the sensor. And the vehicle does not lock the doors for the Door Open Chest. For example, I lock it from the inside. There is no problem opening from outside. If you look at the issues I opened, you can reach. Probably your problem is in the sensors |
08.05.2020 18:18 | # 5 |
gurkan21 | |
There is no problem with the door lock. When you open the door, the ceiling lamp is not lit on the display. |
08.05.2020 18:18 | # 6 |
206FR | |
Welcome friends who have knowledge of pleasant forums help us. Our members who have completed their new membership and entered the forum, please introduce yourself by opening a new topic under the heading "Let's Know Our Members ". Filling in all the information will help us to know you better.
To Open the Subject of Promotion Please; Click This Link: http://forum.peugeotturkey.com/new_topic_form.asp?FID=22 1.- Your name and surname: 2.- Your age: 3.- Your vehicle (Brand, model): 4.- Your hobbies: 5.- Your profession: 6.- Where did you hear the site: 7.- Your Blood Group: 8.- Your horoscope: 9.- The team you support: 10.- Which county or province are you in: Thank you for your attention. |
08.05.2020 18:18 | # 7 |
206cc57 | |
Hi , My right door sensor is broken, my 206cc 2004 model car, I can't see if the door is open. I control it from the mirror, close it hard, handle it. I had to cancel the sensor while installing the alarm, I haven't changed it since the piece is broken around 150 TL.
|
08.05.2020 18:18 | # 8 |
kursat3006 | |
I understood when I got the alarm. Since the electrical parts of our vehicles are a bit difficult and complicated, they disable the sensor of the welded driver's door. For example, you cannot lock the door from my original sand. The alarm sounding event after 1 minute is probably because the sensor is not canceled. You have to show it to a good electrician.
|
08.05.2020 18:18 | # 9 |
gurkan21 | |
thank you for your interest |
08.05.2020 18:18 | # 10 |
murat222 | |
The master who wears the alarm just skipped 1 cable and disconnected and did not notice. There are a lot of cables in the alarm brains.
|
08.05.2020 18:18 | # 11 |
murat222 | |
Bid the beat-up master, I think: D
|