2003-2004 206 1.4HDi Cruise Control Project

Hello friends,

As you know, even though I never use it, I am psychologically obsessed with Speed Stabilization. I almost try to apply even to the bicycle I enjoy. After unraveling in 206+, we also easily bonded on vehicles such as 207-308-3008-5008.

Now, we are on the way to apply 206 1.4HDi vehicles with 2003-2004 output from brake cable 2 cables.

We are working on the vehicle of our brother İsmail Jack67. We collected the documents and schemes and trial works remained. For now, I will share everything as soon as I throw the header just for enthusiasm.

Waiting Impatiently

I understood how excited you were because of the message you sent at 5 in the morning :)

Ali, I saw the message you sent at 05:44 at noon, I sent you a message, but I haven't received a cvp yet, I think you are sleeping :)

We were able to sleep for 2 hours, we were looking for a socket.

When we could not understand from the face with the bar, we spoke from 4 to 6 wire now :)

Today, as a result of our efforts, we pulled the Ecuya line. There is no problem. We saw if the signal goes from EC to parameter and the system is working.

But we couldn't get any results about being a dignitary. We will also try with Planet TOMORROW.

My brother finally came to our vehicles (206 HDI 2004). Let's look forward to waiting for their share. I wonder how it will cost.

Hopefully, the process will be completed with the cost of brake sensor + cable + macaron + some labor + cruise control lever.

[QUOTE = jack67] Hopefully, the cost will be complete with the brake sender + cable + tubing + some labor + cruise control arm fee.
[/ QUOTE]

you missed me sergeant

Brake sensor for the attention of 2-wire friends;

Brake sensors are uniform until 2002 and 2004 versions of 1.4 diesel vehicles. So there is only the sender who lights the lamp when the brake is applied.

Since Peugeot Brake reverses its sensor, another sensor is required to cut the current during cruise control. We will handle this with the reference number 4534.40, which we will receive.


The reason for cruise control is that the ECU is not notified of a brake intervention. The brake appears to be constantly depressed when looking at the ECU parameters. This did not theoretically activate Speed Stabilization.

With the examination of the ECu structure suitable for your vehicle, the appropriate socket and pin check cable will be connected to the 4th socket of this customer.

The 1st and 3rd pin of the socket can work with 12v from battery or any electrical box

But the second end will be connected to the lamp cable from BSi.

In this way. Both bsi and ECu will be aware of the braking intervention.


For now, we have pulled and tested the cable, both bsi and ecu are receiving signals, but the software I use is blocked due to the actual activation. Tomorrow we will overcome it with goodness and show something.

If it works, come cover the ingredients ali: D

If [QUOTE = acypower] works, then grab the ingredients: D [/ QUOTE]

In a closed and warm garage, I would like Ismail and I froze today. The brother in front of the shop we stood in front of him for help, we got out at two and warmed up at the stove, or we went for speed stabilization.

Meanwhile, those who want to take a cable from the brake pedal to the ECu are already free.
N. We'll do the rest

I worked in tourism sometime, he had a uncle, he was working in antalya / alanya, who had a speed stabilizer, did the bicycle gear lever mounted to hold the accelerator pedal from below, he shifted the gear to 5 and adjusted his speed from there.

[QUOTE = 206F is]

I worked in tourism sometime, he had a uncle, he was working in antalya / alanya, who had a speed stabilizer, did the bicycle gear lever mounted to hold the accelerator pedal from below, he shifted the gear to 5 and adjusted his speed from there.

[/ QUOTE]

Is that kind of thing?

[TUBE] dbvthqludk4 [/ TUBE]

He was just like this when he did: D was a little old uncle had rheumatism, the knees were not strong, he found a solution like this: D

[QUOTE = jack67] Hopefully, the cost will be complete with the brake sender + cable + tubing + some labor + cruise control arm fee.
[/ QUOTE] Sorry I forgot to add you + ALI :)
+ There is a cold-eaten body and more.
jack67 2013-12-07 01:51:14

Ali garaj is not always hot trouble :)

yes guys did it happen as a result we are still waiting

we haven't met for a while, hardware is ok but we haven't opened it from pp2000 yet