|
|
|
|
2003 / 1.6 Gasoline Single Door 307 Stop Problem |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 16:56 | # 1 |
 tolgatumer |
|
|
Before I became a member, I tried to look at all the issues as much as I could, but as far as I understand that I could not reach a satisfactory result, my friends ... & nbsp; We haven't understood the problem of my vehicle for about 1 month. & nbsp; The vehicle starts to stop when there is heavy traffic. If traffic is open, no problem & nbsp; Vehicle 1.6 Gasoline 307 Single Door; & nbsp; - (MAP or MAF) sensor changed (problem not fixed) - Throttle Neck (dismantled cleaned problem did not fix) & nbsp; - Gas Pump (disassembled cleaned, reviewed, problem did not fix) & nbsp; - Crankshaft sensor (could be said) & nbsp; < div> - Oxygen Sensor (could be said) & nbsp; - Ignition Coil (could be said) & nbsp; - Spark plugs (could be said) & nbsp; < br> I just disassembled the ignition coil, there was no crack, I couldn't remove the spark plugs because 16 bits were too short .. & nbsp; I squeezed a car so it never stopped the car. entering as & nbsp; Diagnostics I connected to the computer in 4 different places, different codes on each computer, different errors ... & nbsp; I'm confused .. & nbsp; Is there Someone to help? & nbsp;
|
|
| 08.05.2020 16:56 | # 2 |
| estair |
|
|
I write that it will be a benefit, if I read the problem of your life in reno form, if I do not remember the wrong, the friend who opened the subject stopped the traffic in traffic and said that he stopped the car in cold weather and after he had left the car and left the car, he said that he had run the car again, I found the problem in his crank sensor, I changed his car and I mentioned the problem of his car, he changed the car If you want to be solved without spending a lot of money, try to get out and get a new one. |
|
| 08.05.2020 16:56 | # 3 |
| tolgatumer |
|
|
Thanks estair, I just said that I have read somewhere in a while .. I will try and report again from here as soon as possible .. & nbsp;
|
|
| 08.05.2020 16:56 | # 4 |
| tolgatumer |
|
|
The problem still persists ..: (& nbsp; Today the ignition coil, spark plugs, the temperature switch have changed. It still stops when the vehicle warms up. & Nbsp; Crank They also removed the shaft position sensor, cleaned it, but in vain .. & nbsp; Viewed in Bosch Car Service Rami .. Engine coolant temperature 85s no problem .. & nbsp; But when it starts to go 95 and above, the vehicle stops. & nbsp; Put pressure gauge on one of the hoses coming from the gas tank to the engine. I think the master, when the vehicle starts knocking, the pressure drops to the quarter and then to 0. & nbsp; there was nothing .. & nbsp; If you have an idea, please share it .. & nbsp;
|
|
| 08.05.2020 16:56 | # 5 |
| koliva |
|
|
It should not have been so much changed without connecting your vehicle to the computer. It is necessary to see and interpret the error codes if any. If there is no error code then trial and error may be attempted. |
|
| 08.05.2020 16:56 | # 6 |
| tolgatumer |
|
|
Today, we have connected the computer in bosch car service and it doesn't give any error.
|
|
| 08.05.2020 16:56 | # 7 |
| koliva |
|
|
I do not know with which tool Bosch car service is reading the error code, but I recommend you to have a general error scan on a PP2000 service. When was the last time your vehicle was serviced and did this problem occur one month ago? |
|
| 08.05.2020 16:56 | # 8 |
| tolgatumer |
|
|
It was the first time I saw the program in which they read the error code. I asked them to look with PP2000, but there was none .. & nbsp; I was left without gas once on the road. My red light came on and I continued until the petrol so it stopped a lot that day. After buying gas, there was no problem but after a few days the vehicle started to stop in hot weather constantly. & Nbsp; Soon we will go to the authorized service. Let's see if they can connect to the machine there. I will write to the machine again. & nbsp; / div>
|
|
| 08.05.2020 16:56 | # 9 |
| brutal |
|
|
Dude, if nothing happens in the authorized service, Maslak Oto is in the industry - DATA peugeot İbrahim Usta tell me that he came from our forum will help you. Send our greetings to him.
|
|
| 08.05.2020 16:56 | # 10 |
| tolgatumer |
|
|
Thank you for your interest in estair, koliva and brutal guys .. My problem is finally found and resolved .. & nbsp; I was glad to take it to another authorized service because Haramidere Mepa was closed. I had trouble with the charging engine before and when I got the charging error again, I took it to my own master. Then when I didn't give much confidence there, I replaced the charging engine with a new one. On the recommendation of the Peugeot particle there, I went to another master, and the Crankshaft position sensor changed there, the problem was not solved. & Nbsp; Finally the gas pump was dismantled and we just replaced the engine. It works like the vehicle, the traction has improved, I could not get a response when I pressed the accelerator pedal, this was fixed, the idling was fixed, there was a slight knock, and it was improved, thank you .. & nbsp; Beylikdüzü If there is a problem with peugeot or any other vehicle in and around, I will share the address and phone information of the service. thank you everyone. & nbsp; Regards ... & nbsp;
|
|