![]() ![]() |
|
![]() |
1998 Questions about the Peugeot 306 XN. |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 306 |
08.05.2020 16:00 | # 1 |
![]() |
|
There are some problems I can think of and see in the car. 1. My car is scuba but sounds from injectors. 2. It is forced when first starting and when it is working, an explosion sound comes from the exhaust. 3. The engine was singing once in a while but now it has started to sing. (I replaced the Coil, Spark Plug cables and Spark Plugs 1000 km ago. 4. The Engine Fault Light is on occasionally or occasionally while the vehicle is in motion. 5. I think there is a problem with the vehicle's electrical installation. There is a 3200 Watt amp, but either the battery is running out or the amp is not working. (Battery 75 Amps). 6. I just showed it to a master a little while ago, he said the Gasket may have burned, but the temperature of the car is not rising, it is not mixed with oil or falls from torque. I would appreciate if you can help on this issue. Thank you in advance for your interest.
|
08.05.2020 16:00 | # 2 |
![]() |
|
1) Lpg injectors are working with sound. This is a very normal situation. Some injectors have noisy structure. 2) It is necessary to check the gasoline fuel system and the ignition system. I wonder if the battery is enough to answer ??? 3) Have you made valve adjustment ??? Maybe misfire can be corrected ... 4) Does the malfunction continue to burn when it comes on at the gas station ??? If it does not burn in the gas, it is because of the mixture of LPG ... 5) I wouldn't say anything about the electricity event. 6) If the gasket is burned, he must react like he said. What was the km of the vehicle ??? |
08.05.2020 16:00 | # 3 |
![]() |
|
I did not adjust the valve. I've been reading something like that, I read other comments. Could there be a problem with the butterfly or butterfly throat or one of the injectors may be clogged or not working.
|
08.05.2020 16:00 | # 4 |
![]() |
|
The vehicle is currently at 215,000 Km.
|
08.05.2020 16:00 | # 5 |
![]() |
|
In valve machines with 8 valves, regular valve adjustment is required. In my opinion, first of all, make the valve adjustment check. Have it done if necessary. Valve adjustment is one of the most basic settings of the engine ... There is no need to adjust the valve in 16V motors. This is the superiority of the 16V machine.
|
08.05.2020 16:00 | # 6 |
![]() |
|
I solved the problem, guys. The vehicle's charger has burned out. it was a problem caused by it.
|
08.05.2020 16:00 | # 7 |
![]() |
|
May it be late then ... But you should check the valve setting |
08.05.2020 16:00 | # 8 |
![]() |
|
Well, I would appreciate if you write what the valve adjustment range measurements are.
|