106 xr 14 rim users tire rubbing

Hi friends, my 106 model 106 xr 1.4 car has 175/65/14 rim tires. When the right front wheel turns to the left, it rubs on the hood, it does not have anything when it goes straight. I would be glad if friends who can help with the method help. Thanks in advance ...

I was in my old car, I couldn't solve this problem

Look at the wheel settings, you can take measurements on the finger, there is a little deviation in the settings. Wheel fender and chassis spacing.

Thanks for your interest, the wheel spacings are normal. Equivalent on both sides, but the water tank seems to be okay if it can go back a little further.? When the vehicle rod adjustment is done, the problem does not arise regarding the flatness and adjustment.

What is the original tire size of the eee 99 model 106 xr 1.4? these sizes you mentioned are not original?

I have 106 xr tire sizes are the same, but it has never caught my attention.

I am thinking of buying 185 in 175 and not 185 when I change my tires.

original dimensions 165/70/13. When I bought the car, it was like this. Of course, the tires were a little worn, it was obvious when I installed a new tire.

[QUOTE = byx] original dimensions 165/70/13. When I bought the car, it was like this, of course, the tires were a little worn out, it was obvious when the new tire was installed. I'm going to work, brother.

As far as I understand, my friend, the tire sizes you are using are not original. It is natural that it rubs as it is. then you can wear a & nbsp; flange but this time you can rub it into the fender, then you will open the fender a little. or your car will turn to the size of the original tire, but it is all up to you like a bicycle tire 165/70/13

If you want a flange, I have 0.5 mm fender effect.

You are my brother: D

185/55/14 my measurements; when I broke the steering wheel it was rubbing, I thought it was because I lowered the car too much, when we removed the wheels to install the original springs, we saw that the front part of the hood fell and there were scuff marks on the non-screw end. The problem was solved by completing the missing screw.

The problem with me is a little different. Let's see what we are going to do. I will talk with volkanbly from the forum. How should I look at the same rim tomorrow, because I don't have any rubbing in his vehicle.

Normally 106 rim size is 165/70/13. Is there such a difference between 13 and 14? outlaw 2013-02-14 18:26:49

185 If you plug it in, I think you will replace the water tank with a suitable tank, or you will put a flash between the rim and the problem will be solved.

I am thinking of doing exactly that. I will change the tank and look, thanks to everyone ...

friends tire rubbing has been solved ... & nbsp; When I bought the vehicle it was rubbing slightly. But after replacing the tires & nbsp; with a new one, it started to rub more. I know the right fender of the car has changed. And it saved me from this trouble. I wish everyone trouble-free trouble-free driving.

[QUOTE = byx] friends tire rubbing has been solved ... & nbsp; When I bought the vehicle it was rubbing slightly. But after replacing the tires & nbsp; with a new one, it started to rub more. I know the right fender of the car has changed. and saved me from this trouble. I wish everyone trouble-free trouble-free driving. = "0" alt = "Smile" title = "Smile" /> & nbsp; I'm very glad valla & nbsp;

[QUOTE = volkanBLY] [QUOTE = byx] friends tire rubbing has been solved ... & nbsp; When I bought the vehicle it was rubbing slightly. But after replacing the tires & nbsp; with a new one, it started to rub more. I know the right fender of the car has changed. And it saved me from this trouble. I wish everyone trouble-free trouble-free driving. = "0" alt = "Smile" title = "Smile" /> & nbsp; I'm very glad valla & nbsp;