Peugeot Forums - Peugeot Fan Club

106 Wiper Water Tank

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 106
08.05.2020 16:06 # 1
Guests
I have a wiper water tank cracked. As I fill the water from above, it drains from the bottom. How can I repair this crack? Does it happen with silicone? Or I don't think it will be too expensive if I change it completely. But most importantly, how can I reach the warehouse easily? Do you make the wheel just right? thanks in advance.
08.05.2020 16:06 # 2
voodoo
I have 206 too, I don't know why the same situation is ... how is it resolved :( hoodoo 2011-09-10 17:24:55
08.05.2020 16:06 # 3
Engin Tepe
If the hand and soldering tool is in place, you can boil the cracked part by melting.
If there is no room, it is possible to flow between the inside and outside from the outside, and the pressure can flow through the pressure if you take a sigh and fill the silicon together. When the bidet was completely dry on the foil tape cectin.
08.05.2020 16:06 # 4
Guests

can be repaired with hot silicone 106 I tried it in quickim, you can easily disassemble the process by removing the hood inside the fender by making the right wheel full right or left.

08.05.2020 16:06 # 5
koliva
Maybe it works for you:


08.05.2020 16:06 # 6
Guests
I had an idea in my head, thank you. I will not try it myself. By the way, the price of the warehouse was 50 TL. Standard from 1997 to 2001 model. Alicangulpin is 2011-09-10 19:13:51
08.05.2020 16:06 # 7
Guests
[QUOTE = voodoo] I have 206 too, I don't know why the same situation ... how to solve this situation :( [/ QUOTE]

For 206, it is 52 TL. Standard from 1998/2008.
08.05.2020 16:06 # 8
voodoo
My new warehouse costs 52 TL
08.05.2020 16:06 # 9
Guests
Yes, the price of the original zero warehouse.
08.05.2020 16:06 # 10
Guests
[QUOTE = Alicangulpinar] Wiper water tank cracked. As I fill the water from above, it drains from the bottom. How can I repair this crack? Does it happen with silicone? Or I don't think it will be too expensive if I change it completely. But most importantly, how can I reach the warehouse easily? Do you make the wheel just right? thanks in advance. [/ QUOTE]

I had to disassemble it, I had to remove the right fender, but there is a substance like dayson, it is like silicone, but when it dries, the hose that goes to the wiper motor is cracked. You have to wait. Though they did not want a little money again, what was the original 80tlmi if I remember correctly?
08.05.2020 16:06 # 11
ByHack

Friends extended a hose upwards to fill the tank with water in the 307s. We are very concocted where this hose is connected to the tank. I also noticed the situation later. I don't know how it is in the 106s, but if there is such a thing, if you want to check the water filled hose.

Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”