106 quik Idling Sensor

My name is Emre. I am 19 years old, have 2ooo model 1o6 quik. Friends car revs up to 4000rpm in self-rotation. I went to the master, cleaned the throttle and disconnected a sensor from there, it improved. When I asked, nothing will happen. He said the sensor doesn't work, but friends. What does this sensor do? I think the vehicle started burning more than that day.

my friend if the idling sensor is the most important part of the car. The original one is in the magnet. and the price is very high 200 blah blah blah. Your car burns very hard, the idle stops as soon as it pulls, it affects a lot in the car.

I do not know the exact name of the part, but a piece of water plugged on the throat to which the air filter is attached is removed

If the air filter is connected, there may be an air flow meter.

I have 98 model 106 xr and I have the same problems. First, the car could not provide idle, it stopped and then started to increase the speed. When running in the morning, there is no problem. After 5 minutes, the speed was increasing. While waiting at the lights, everyone shouted because the car was shouting. How many times have I done the job of cleaning that little butterfly, after everything is done, everything will be normal, 20 minutes after the industry. I removed it from someone else's 206 and put it on me. I used it for 1 day. The car was normal so we decided to change it. (By the way, 306's parts do not fit, but 206's idle sensor is sleeping. Moreover, 106's parts are 300 TL and 206 TL is 130). Everything is normal for 3 months. but I feel it will deteriorate again. I run the car in the morning, I just pull my foot off the clutch, and even if I don't deliver the gas, the car is on its own.