106 Quicksilver Suspension

After 306 I bought it to my cousin, I started to dislike the suspension of my vehicle and on top of that I got on my friend's original suspension quicksilver and saw that 106 quicksilvers can spread very nicely :)) I am going to remove the torsions first and put the original bow in front of them. Is there a 3.5 cm spring that can give the flexibility of the original broadcast or does the 5 spring provide the same spring?

If you lift the back torsions up to 5 cm, and if you buy 3.5 l of sports bows to the front, you will have a flattened vehicle view, and also you will get a stricter than the head of the bend; But Sports Should Be On The Bow And Give You A Good Heading ..

I don't think Eiback will be on top, but I need to investigate again.

I am undecided whether the torsions will go into complete maintenance and remove 1 tooth, if I buy a new sports bow on the facsimile front or not. I don't have a problem since it is printed, so it doesn't matter whether it is flat or not. I can stretch the side dods and make the front bumper squared and give that flattened look again. I just have to increase the springing event.

you can look at the eibach pro kit as 3.5 spring

Ümit, our Sahin peugeot, we get information from a good master, we get the parts from our shop ...

My lion's torsions were removed and ball replacement was maintained. I say there is a world, I would like to say to friends who think of lowering the agent. It turns out that 106 quicksilvers could also be bowed.

eibach pro kit 3,5 does not look for the original spring ... still very satisfied .. baybarsta very satisfied ....

I have been trying sparcos for now. The clicks have decreased a little, let me see the Saturday, I will do some front-end maintenance, so I can switch to eibach according to the situation after that;)