|
|
|
|
106 PLACING THE INSTALLATION CABLE (HELP) |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 106 | |
| 08.05.2020 19:20 | # 1 |
 emre41 |
|
|
Hi . The previous owner had my vehicle installed. when I bought the cables were going over the carpet. Anyway, all the connections were wrong and the amphitheater received +12 volts from the back of the tape. By the way there wasn't even insurance. I removed them all. I think I need to remove the rear side trims to hide the cables. Anyone who has experienced before. Is there a way to thread the cables without removing the pendulum? Thanks.
|
|
| 08.05.2020 19:20 | # 2 |
 Ahmet_ach |
|
|
When the tape triggers the + 12v amplifier on the back of the basin, the anfi calf will be constantly on, so that the battery will not run out of the battery, you must first pull the thick electric cable from the accumulator directly to the amphitheater and pull the under the door under the door. You can take the exit from the back of the tape on both cables and take out the floor under the door until the amphitheater by the passenger. |
|
| 08.05.2020 19:20 | # 3 |
| emre41 |
|
|
Cables did not give much confidence. Thanks
|
|