|
|
|
|
106 I ARE WAITING FOR YOUR XR STOP LAMP HELP ... |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 106 | |
| 08.05.2020 13:59 | # 1 |
 iLLeGaL |
|
|
WHEN I WANT TO REMOVE THE LIGHT STOP OF THE RIGHT STOP WHEN I LIKE THE PARK, I HAVE REMOVED THE STOP WHEN I WANT I HAVE A VIDEO ON THE BOTTOM AND I HAVE A SQUARE, THERE ARE I HAVE A BACKGROUND THERE I'M WAITING FOR YOUR HELP...
|
|
| 08.05.2020 13:59 | # 2 |
 Guests |
|
|
you only need to re-silicone when removing and installing the cover.
|
|
| 08.05.2020 13:59 | # 3 |
| iLLeGaL |
|
|
THE COVER DOES NOT REMOVE THAT I DON'T COME BETWEEN A BUMPER CONNECTED, WHEN I REMOVE THE SCREW OF THE BACK ...
|
|
| 08.05.2020 13:59 | # 4 |
 individual |
|
|
its screw two 2 per stop I wonder if you loosened one? the other two in the fender Something similar to the ventilation grille the place where the wheel wrench hangs or you have to remove them too |
|
| 08.05.2020 13:59 | # 5 |
 gokhanozmen |
|
|
Now, when removing the stopper, you need to unscrew the two screws that tighten those screws, but there are only two butterfly screws. Take care of it.
|
|
| 08.05.2020 13:59 | # 6 |
| iLLeGaL |
|
|
The 1st of the butterfly was right behind when I opened the trunk in the middle, I looked straight up, or where is the other one?
|
|
| 08.05.2020 13:59 | # 7 |
 sinan-s |
|
|
There are 2 screws .. one is right behind the other and there is ventilation. Loosen them. Then remove the electrical socket. The ball will come to your hand.
|
|
| 08.05.2020 13:59 | # 8 |
| iLLeGaL |
|
|
ventilation is something I see exactly where you call it, maybe I can not remove it right now.
|
|
| 08.05.2020 13:59 | # 9 |
| sinan-s |
|
|
just behind the stob is in the corner .. even where the wheel wrench is attached ..
|
|
| 08.05.2020 13:59 | # 10 |
| iLLeGaL |
|
|
I guess it stays on the inside, let me see when I go in the evening.
|
|