Peugeot Forums - Peugeot Fan Club

106 How to remove dodics and side sills?

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 106
08.05.2020 17:51 # 1
medus61
friends, 106 Quick I have to remove and re-silicone the fender dodiks and side sills. Is this difficult, does it require a lot of details?
thanks in advance.
08.05.2020 17:51 # 2
outlaw
they are also clip-on when you disassemble it, the chance of breaking it is very very high ...
You can stretch it out slowly without using force.
08.05.2020 17:51 # 3
medus61
[QUOTE = outlaw] the probability of breaking when removing the original is also clip-on is very high ...
You can stretch it out slowly without using force ... [/ QUOTE]
so there is no screwing. ok thank you.
08.05.2020 17:51 # 4
outlaw
THEY WILL BE CLIPED AT THE ORIGINAL BUT IF IT HAS BEEN PROVIDED BEFORE, THE SCREW DISPOSAL IS AVAILABLE ...
08.05.2020 17:51 # 5
medus61
[QUOTE = outlaw] THE CLIPS AT THE ORIGINAL BUT THERE ARE THE POSSIBILITY OF SCREW DISPOSAL IF IT HAS BEEN OPERATED ... [/ QUOTE]
thanks, I'm starting the operation today ..
08.05.2020 17:51 # 6
medus61
Yes, I removed the dods and side sills and put them back in place. The procedure took about 5-6 hours.
08.05.2020 17:51 # 7
outlaw
Good luck then
08.05.2020 17:51 # 8
yusufcaglarakarsu
We would like to see the pictures of the workmanship. Big smile
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”