106 gas-free and exhaust blasting

Hello everyone, guys. I just joined you. I was very enthusiastic and bought a 106 1.6 xsi of 95 model. But these days it started to hurt my head a lot. I run the car, sometimes it does not get up, does not eat gas and blows exhaust like crazy, it seems like it gets better after taking off, but the same problem does not eat gas when it is loaded into the gas, and the car is kicking (as well as misfire) and it blasts like gunfire. Most of the time, I have gathered the people on my head because of the blasting from the exhaust :) On the way, it is okay, it is okay. I am doing the same things when it is loaded to a little gas. The cold and hot engine does not change the event. I could not find a really good master, I'm in Antalya. I would be happy if you help me. I wonder why I can not use the car :( thank you in advance

coil is distressed.

spark plug cables are new, but of course you need to change them to see the result. the bidet is too hot

Is there anybody else to help please urgent please

valve adjustment

There is no problem in valve setting, it is new. we couldn't find a solution

whatever you do my brother does not pass bosa do not have the same in me

[QUOTE = Ferda] whatever you do, my brother does not pass bosa do not have the same in me [/ QUOTE]

I had the 206 gti with the same problem, I don't know if it was the same, but the car was drowning officially, it was clogged and cluttered. They made adjustments from the computer, and they did not repeat, I hope it is simple.

check the coil and replace the spark plugs. One of the spark plugs fails to ignite or there is no electricity. As soon as the vehicle runs efficiently, the intermediate speed is cut off.

Unfortunately, I couldn't find a solution.

First, use your car in half a cloth and observe, if there is no problem in gasoline, there is a problem in the lpg system.

my car is gasoline by the way

Coil can replace the spark plug and spark plug cables with the original. When working at idle, give gas and look at the tachometer. How many thousand cycles does the cut occur?

an electronicist solved my problem in sakarya.