|
|
|
|
106 AMORTISOR SPRING TABLE |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 106 | |
| 08.05.2020 14:02 | # 1 |
 CIHANGIR_DONMEZ |
|
|
IN ALL 106 XS GTI AND QUICKS, 6 YEARS AND 5 CM OF SPRINGS WHEN THE SPRING SITS FULL ON THE TABLE, SO THAT THE SPRING THROUGH THE LIFT OF THE CAR IS THERE THAT THE FRIENDS HAVE AN EVENT TO THE PRESS |
|
| 08.05.2020 14:02 | # 2 |
 Ismail |
|
|
I don't know because sports are not broadcast 
|
|
| 08.05.2020 14:02 | # 3 |
 sertacfilm |
|
|
Let me explain to you, my friend ... If the sports springs are attached with a sports shock absorber, there will be no slippage from the table. If the sports spring is applied, there is a risk of sliding from the table if there is a 5 cm or 6 cm spring in the bidet. below is an example 6 cm spring and original 106 gti shock absorber result: a sopr spring slipped from the table  |
|
| 08.05.2020 14:02 | # 4 |
 hasimayaz |
|
|
Unfortunately it slides from the table .. There are 3 ways to fix this, 1. The shock absorber can be shortened. 2. Sports shock absorber. 3. The spring is boiled by stitching the plate
|
|
| 08.05.2020 14:02 | # 5 |
| CIHANGIR_DONMEZ |
|
|
[QUOTE = hasimayaz] Unfortunately it slides from the table .. There are 3 ways to fix this, 1. The shock absorber can be shortened. 2. Sports shock absorber. 3. The spring is boiled by stitching the plate [/ QUOTE] what does a welded weld boil to the spring plate?
|
|
| 08.05.2020 14:02 | # 6 |
| hasimayaz |
|
|
[QUOTE = CIHANGIR_DONMEZ] [QUOTE = hasimayaz] Unfortunately, sliding from the table .. There are 3 ways to fix this, 1. The shock absorber can be shortened. 2. Sports shock absorber. 3. The spring is boiled by stitching the plate [/ QUOTE] what does a welded weld weld to the spring table [/ QUOTE] Several holes are thrown into the tray. Ring is made with thick steel wire and the ends of the ring are welded. If desired, the ring is cut with a spiral.
|
|